| Alveo 3mm Underlay: Ideal for use with floating floors laid over level subfloors. When used over concrete or screed subfloor, a 1000 gauge Damp Proof Membrane (DPM) is also required. |
 |
|
| Damp Proof Membrane (DPM): 1000 gauge plastic membrane used over concrete or screed subfloors. Please note: your subfloor should always be free from moisture. |
 |
|
| Safe 'n Sound 5mm Acoustic Underlay: Black sponge underlay with fine pitch polyester reinforced tan crepe backing and black polyester facing. For best results, Safe n Sound is used under a floating floor. Removes up to 27 decibels of impact sound, ideal for use above ground floor. Rolls are 15m2 (11m x 1.37m). Made in Great Britain. |
 |
|
| Kährs Edge Joint Adhesive: Waterbourne. For assembling all Kährs 'T&G system' floors. Made in Sweden. |
| Wurth Panel Adhesive: Solvent based. For fixing mouldings & skirtings etc: this adhesive is especially strong and can be used for a range of applications. |
 |
| F21 Adhesive: Solvent based. Used to fix reclaimed wood flooring. Adheres well to old bitumen residue commonly found on reclaimed flooring. |
 |
|
| Lecol 7500: Solvent based, clear cellulose mastic filler. Mixed with sawdust from sanded floor. Matches colour of floor, quick to set and sandable. Made in Germany |
 |
| Lecol 5500: Solvent based, light synthetic resin adhesive. Used to adhere new strip and block flooring. Quick to set, this durable and easy to use adhesive is reliable and moderately priced. Made in Germany |
 |
|
| Bona Mix & Fill: Water based joint filler designed to be mixed with sawdust to provide a filler for joints up to 2mm in width and other minor defects in wood floors. Bona Mix & Fill is not suitable for use on Merbau floors. Made in Sweden. |
 |
| Junckers SylvaFix: For adhering 'header joints' on all Junckers flooring, laid using the clip system. |
 |
|
| Bona Joint Filler: Solvent based. Joint filler designed to be mixed with sanding dust to provide a filler for joints up to 5mm in width. |
| Bona Gap Master: Silicone free mastic/adhesive designed for filling gaps. Based on a polyurethane/acrylate compound the material can be sanded and overcoated with floor finishes. It contains no solvents, is odorless and maintains a high degree of flexibility. Available in a variety of natural wood colours. Applied with a mastic gun. Made in Sweden. |
 |
|
| Tarkett Putty Fillers: Available in a variety of colours. Ideal for use on small gaps in boards or header joints. Can be touched up when dry with Kährs 'Touch Up lacquer'. |
 |
| Stopgap Latex (greenbag): self leveling compound (two parts). Used to level screed subfloors for floating floors. |
 |
|
| Lambswool Pads & Applicators: Traditional applicator for oils and lacquers. |
|
|
| Bona Big Foot & Applicator: With swivel head, this applicator is ideal for applying lacquer to large areas. Refil sleeves available. |
 |
| Kährs Knocking Blocks: Now available for both Woodloc and T&G floors, these are helpful when laying Kährs floating floors. |
 |
| Jemmy Bars: Available in both Kährs and Tarkett. Used for effectively closing header joints on most floating floors. |
 |
| Kährs Wedges: Plastic wedges used to achieve an even expansion gap when laying floating flooring. |
 |
|
| Porta Nails: 2" (50mm) nails for use with 'Porta Nailer' secret nailer. |
| Pins: Pins for use with Maestri electric pin gun. Ideal for pinning mouldings. |
 |
|
| Sanding Discs, Belts & Rolls: We are proud to supply the full range of abrasives from respected manufacturers 'Hermes' and 'Bona'. We also supply mesh sanding screens, scrad pads and wings. |
|
|
| Radiator Ferrules: Discreet solid prefinished hardwood rings in a variety of woods. Used to elegantly and inconspicuously finish around radiator pipes. |
 |
| Dust Covers: Cover your furniture to ensure that dust from the process of installing your floor does not affect your belongings. |
 |
| Cork: Traditionally used to fill expansion gaps. |
 |
|
